OT Asset Security

How Do I Protect All My OT Devices — Whether I Know What They Are or Not?

Every OT environment has devices that never made it onto an asset list: an unmanaged switch, a contractor's laptop left behind after a shutdown, a sensor added by an integrator and never logged. You don't have to know a device exists to stop it from doing anything it isn't authorized to do. BlastShield protects every communicating device, including the ones you didn't know were there, without first needing to discover them. A device does not have to be on anyone's asset list to be denied the moment it tries to talk to something it isn't authorized to reach.

Learn about related attacks on Hackopedia

What is BlastShield?

BlastShield is a zero-trust network access solution that helps organizations implement a zero-trust architecture.

Instead of relying on enhanced identity governance (EIG), complex layers of micro-segmentation, or cloud-based gateways, BlastShield utilizes a software-defined perimeter (SDP) approach for more granular access controls and reduced risk from stolen credentials and complex management.

Start a free trial

The OT Asset Visibility Problem: You Don't Know What You Have

The result: security teams routinely discover devices on OT networks that have been operating, undocumented, for years — sometimes decades. These unknown devices represent unmanaged attack surface: unpatched firmware, default credentials, no logging, and no place in anyone's incident response plan.
Why Traditional IT Segmentation Tools Don't Work in OT

Vendor-Installed Equipment

Maintenance laptops, configuration tools, or access gateways left behind by vendors after a service visit — connected to OT network segments and forgotten.

Shadow IoT Sensors

Smart environmental sensors, condition monitoring devices, or wireless meters added by operations staff without IT/security approval or documentation.

Obsolete Systems

Legacy servers, HMIs, or workstations that were "decommissioned" but never disconnected — still powered on, connected, and potentially reachable by attackers.

Undocumented PLCs

Control devices added during production line expansions or facility changes years ago that never made it into the asset management system.

Unauthorized Personal Devices

Operator smartphones, personal laptops, or tablets connected to OT network segments for convenience — bypassing all security controls.

Rogue/Attacker Devices

Devices intentionally placed by attackers for persistence — network implants, compromised hardware, or malicious USB-based devices dropped on the OT network.

Why Traditional Security Models Fail for Unknown OT Devices

Most OT security tools are built around the assumption that you have a known asset inventory. Vulnerability scanners assess vulnerabilities in devices you tell them about. Patch management systems update devices you've enrolled. Endpoint security agents run on devices you've provisioned. None of these approaches help with a device you don't know exists.

Traditional Approach

  • Security controls applied to a static asset list
  • Unknown devices have no security controls
  • Active network scans can crash OT devices
  • Rogue devices operate undetected indefinitely
  • Vendor equipment left on network unnoticed
  • Inventory drift grows over time

BlastShield Approach

  • Unconfigured devices are blocked by default
  • With connection logging enabled, every denied attempt is recorded as evidence of what the inventory missed
  • Discovery comes from detection partners, enforcement from BlastShield
  • No agent and no firmware changes on the protected asset
  • Vendor access limited to the destinations its policy names
  • Your PLCs stop answering scans

How to Protect All OT Devices — Known and Unknown

Change the order of operations. Instead of waiting for a complete inventory before you secure anything, put default-deny in place first. BlastShield blocks any connection attempt from a system not explicitly configured with a policy and, where connection logging is enabled, logs it, so a device the inventory missed is denied the moment it tries to communicate.
1

Default-deny for anything unconfigured

A device with no policy is denied the moment it attempts to communicate and, where connection logging is enabled, logged. It never needed to be inventoried first.

2

Log every attempt, allowed or not

With connection logging enabled, the log is the evidence of exactly what your inventory missed, whether that inventory was manual, an automated import, or a discovery scan.

3

Apply the same policy regardless of what you know about the device

BlastShield does not need to identify a device to deny it.

4

Feed the logs back into your own inventory process

BlastShield supports asset inventory controls; it does not perform the inventory.

5

Where full active discovery is required, pair BlastShield with a discovery tool

An export from a partner platform such as Nozomi, Claroty, or Dragos can be imported as the deployment baseline. BlastShield is the enforcement layer, not the discovery layer.

The zero-trust inversion: Traditional OT security assumes everything on the internal network is trusted until proven otherwise. Default-deny assumes nothing is: an undocumented PLC receives no more implicit trust than a rogue device placed by an attacker.

How BlastWave Protects Every Device — Even the Ones You Don't Know About

BlastShield was built on the recognition that OT asset inventories are never complete and never current. Rather than requiring a perfect inventory as a prerequisite to security, BlastShield provides protection at the network access layer that applies to every communicating device — regardless of whether it appears in any asset management system.
Detection Finds It. BlastWave Makes It Unreachable.
BlastShield does not perform asset discovery. BlastWave works with Nozomi Networks, Claroty, and Dragos. Their platforms find what is on your network. An export from any of them can be imported into BlastShield as the baseline for a deployment, so the assets they discovered become the assets that stop answering. Detection tells you what is there and what changed. It cannot make the asset stop answering. BlastWave is what acts on what detection finds.
Blocked Before Anyone Knows It Is There
A system with no policy is blocked the moment it attempts to communicate, whether or not it is on any asset list, and, where connection logging is enabled, logged. A compromised device attempting to transmit to an unauthorized external destination is blocked. With logging enabled, the log is an evidence feed of exactly what the inventory missed.
No Agent on the Protected Asset
No agent is required on the protected asset and no firmware changes are needed. The BlastShield Agent is optional and exists for integration with IT systems. Your PLCs stop answering scans.

Frequently Asked Questions

How do I protect OT devices that aren't in my asset inventory?

Put default-deny in place. BlastShield blocks any connection attempt from a system not explicitly configured with a policy, so a device missing from your inventory is denied the moment it tries to communicate. Where connection logging is enabled, the attempt is logged. BlastShield does not perform asset discovery; the log shows you what the inventory missed.

‍

How do I handle devices that are on the network but haven't been authorized?

BlastShield blocks them by default: a system not explicitly configured with a policy cannot connect. With connection logging enabled, review the denied attempts in the log, then add the device to policy or remove it from the network. Policy activation, from activation to enforcement, takes seconds, often under one second.

Does BlastShield work on all OT protocols and device types?

Yes. BlastShield's network-layer protection is protocol-agnostic — it applies to any networked device regardless of the protocol it uses (Modbus, DNP3, EtherNet/IP, BACnet, OPC, Profinet, or any other). Device type, vendor, age, and operating system are irrelevant to the protection model. Any connection attempt from a system not explicitly configured with a policy is blocked, whatever protocol it uses. See our related pages on protecting legacy OT systems and preventing OT internet exposure for additional context.

Related OT Security Problems

Preventing internet exposure is the first line of defense. These related pages address the additional layers of OT security BlastWave protects against:
Internet Exposure

How to Prevent OT Systems from Being Publicly Accessible

Make every OT device — including unknown ones — invisible to internet scanners and attackers.

Internet Exposure

How to Protect Legacy OT Without Downtime

Secure end-of-life OT devices without patches, firmware updates, or operational downtime.

Internet Exposure

How to Prevent Lateral Movement from IT to OT

Stop ransomware from using unknown devices as lateral movement pivot points.

Internet Exposure

How to Protect OT Devices from Weak Passwords

Eliminate default credentials on devices.

Your PLCs Stop Answering Scans.

See it on your own scenario. In a demo we run a scan against a protected controller in front of you, so you keep the artifact, then an authorized operator reaches the same device.

Our Privacy Policy applies.